Beta Marine Engines

GB · GB

Do I need to worry about a battery charger and alternator attempting to charge my batteries at the same time? This is on a 1505 with optional 100 amp alternator. I have checked with the battery charger manufacturer and they say it is not a problem....I don't think it will be a problem for the Beta 100 amp a...

whoosh34 · whoosh34

Hi Stanley, Would a 14hp Beta be a straight crossover from my 2gm20 in my CAl 29? Where would I get one in California-San Diego? Approx purchase and install? Thanks Steve

Peregrine · Peregrine

We did the dockside testing and the first sea trial for the new BD1005 in our Bristol34. The good news is that the engine is quiet, smooth, and powerful, just as I had expected. We have a couple of minor problems though: 1. The mechanic had to set the idle at a tick over 1000 RPM. Any lower than that, and the e...

jalo · jalo

Hello Stanley I have already fitted the drive to the engine and the boat is in the sea but is there any measurement of the ideal height or level for the engine when you mount it? I have just fit it so it's look correct from front side of the engine and also that the drive looks to be at a correct alignment thro...

danhaun · danhaun

Hi all: I want to replace my volvo MD11c but I am wondering about the left handed prop. Somewhere I read that I could get a beta with a left handed v-drive but I cannot seem to find the reference. I am also concerned about access to the oil pump, dipstick, water pump and oil filter since the engine will...

Topic		Started By	Replies	Views	Last Post
	100 Amp alternator (Preview) Do I need to worry about a battery charger and alternator attempting to charge my batteries at the same time? This is on a 1505 with optional 100 amp alternator. I have checked with the battery charger manufacturer and they say it is not a problem....I don't think it will be a problem for the Beta 100 amp a...	GB	6	4115	Jul 11, 2008 by Stanley
	Cal 29 2gm20 repower (Preview) Hi Stanley, Would a 14hp Beta be a straight crossover from my 2gm20 in my CAl 29? Where would I get one in California-San Diego? Approx purchase and install? Thanks Steve	whoosh34	3	2097	Jul 2, 2008 by Stanley
	New BD1005 Teething Problems (Preview) We did the dockside testing and the first sea trial for the new BD1005 in our Bristol34. The good news is that the engine is quiet, smooth, and powerful, just as I had expected. We have a couple of minor problems though: 1. The mechanic had to set the idle at a tick over 1000 RPM. Any lower than that, and the e...	Peregrine	7	1849	Jun 30, 2008 by Stanley
	Alignment to 120S drive (Preview) Hello Stanley I have already fitted the drive to the engine and the boat is in the sea but is there any measurement of the ideal height or level for the engine when you mount it? I have just fit it so it's look correct from front side of the engine and also that the drive looks to be at a correct alignment thro...	jalo	1	889	Jun 25, 2008 by Stanley
	repowering a Pearson 323 - (volvo MD11c with walter v-drive (Preview) Hi all: I want to replace my volvo MD11c but I am wondering about the left handed prop. Somewhere I read that I could get a beta with a left handed v-drive but I cannot seem to find the reference. I am also concerned about access to the oil pump, dipstick, water pump and oil filter since the engine will...	danhaun	5	7528	Jun 17, 2008 by Stanley
«First < 1 … 129 130 131 132 133 … 148 > Last» \| Page of 148 sorted by