Beta Marine Engines

Chris · Chris

I have a Beta 28 with a C series control panel. I want to re-locate the control panel below deck to better protect from the weather and add engine health display function by the chart table. Does Beta Marine make a T connector for their wire harness so a second control panel with primary engine start/s...

sailalibi · sailalibi

I am looking to replace my 24 hp universal 5424 and need help in deciding which beta would fit

Randy Webster · Randy Webster

I have a Beta 28, D1005 with the Iskra 100 amp alternator. The house battery bank is comprised of four T-105 6 vdc connected to deliver 450 ah at 12 vdc. I have read that "Trojan calls for 14.8-15.0 for their popular T-105's." What is the charging voltage set point of the Iskra 100 amp alternat...

ssfein · ssfein

Just sea trialed my 30 and it runs like a clock. at sustained 2800 rpm for 30 min after long warm up the temp stayed at 160. I was expecting it to go to 180. Past engines have gone 180 dispite cold Maine waters. Is there an issue here?

krivanj · krivanj

Getting ready to install this engine and have a 1/2" inlet hose from the old engine. I wondered if this is ok?

Topic		Started By	Replies	Views	Last Post
	Adding a second engine control panel? (Preview) I have a Beta 28 with a C series control panel. I want to re-locate the control panel below deck to better protect from the weather and add engine health display function by the chart table. Does Beta Marine make a T connector for their wire harness so a second control panel with primary engine start/s...	Chris	3	629	Jul 7, 2015 by Stanley
	repowering an allied seawind2 (Preview) I am looking to replace my 24 hp universal 5424 and need help in deciding which beta would fit	sailalibi	1	543	Jun 23, 2015 by Stanley
	Alternator set point versus T-105 charge (Preview) I have a Beta 28, D1005 with the Iskra 100 amp alternator. The house battery bank is comprised of four T-105 6 vdc connected to deliver 450 ah at 12 vdc. I have read that "Trojan calls for 14.8-15.0 for their popular T-105's." What is the charging voltage set point of the Iskra 100 amp alternat...	Randy Webster	1	501	Jun 13, 2015 by Stanley
	water temp seems low (Preview) Just sea trialed my 30 and it runs like a clock. at sustained 2800 rpm for 30 min after long warm up the temp stayed at 160. I was expecting it to go to 180. Past engines have gone 180 dispite cold Maine waters. Is there an issue here?	ssfein	1	511	Jun 8, 2015 by Stanley
	Minimum water inlet hose for Beta 14 (Preview) Getting ready to install this engine and have a 1/2" inlet hose from the old engine. I wondered if this is ok?	krivanj	3	553	Jun 8, 2015 by Stanley
«First < 1 … 63 64 65 66 67 … 147 > Last» \| Page of 147 sorted by