Beta Marine Engines

Paul Mileski · Paul Mileski

Hello again! I could not find a max inclination spec and want to confirm that my inclination of ~ 12 degrees is not excessive. Thanks again!! --Paul Mileski

ver900 · ver900

I have a Beta Marine 20hp. The last owner had the engine installed just before selling the boat.In the last two years I have had a small water lose so have to fill up or the alarm comes on.I have fitted a new cap as the last one broke into 3 bits. Have fitted the same pressure cap but still having the same probl...

Paul Mileski · Paul Mileski

I realize that this topic is not new- but I ask based upon recommendations by local folks (who recommend 1 5/8"). Is 1 5/8 inch ID exhaust hose acceptable for the Beta 16 for a run of about 10 feet from engine to hull discharge? The smaller (vs 2") size would be more convenient but obviously I...

MitchWest · MitchWest

I have the B38 with the 100A alternator and ribbed belt. I just had to replace the fresh water pump on my engine, and it made me think about the alternator--I am preparing for a long trip that cannot be sailed effectively (the "Baja Bash"). If the alternator goes, so goes the engine. I coul...

Paul Mileski · Paul Mileski

Hello! I'm proceeding with the re-power for my Columbia 8.7 and wonder about waterlift muffler sizing. Centek lists several 2" models of different volumes. Any recommendations? Thanks! --Paul Mileski

Topic		Started By	Replies	Views	Last Post
	Max inclination: Columbia 8.7 and Beta 16 (Preview) Hello again! I could not find a max inclination spec and want to confirm that my inclination of ~ 12 degrees is not excessive. Thanks again!! --Paul Mileski	Paul Mileski	1	514	Apr 22, 2015 by Stanley
	Loosing water (Preview) I have a Beta Marine 20hp. The last owner had the engine installed just before selling the boat.In the last two years I have had a small water lose so have to fill up or the alarm comes on.I have fitted a new cap as the last one broke into 3 bits. Have fitted the same pressure cap but still having the same probl...	ver900	6	732	Apr 17, 2015 by ver900
	Exhaust size...Beta 16 (Preview) I realize that this topic is not new- but I ask based upon recommendations by local folks (who recommend 1 5/8"). Is 1 5/8 inch ID exhaust hose acceptable for the Beta 16 for a run of about 10 feet from engine to hull discharge? The smaller (vs 2") size would be more convenient but obviously I...	Paul Mileski	1	539	Apr 16, 2015 by Farron
	emergency alternator? (Preview) I have the B38 with the 100A alternator and ribbed belt. I just had to replace the fresh water pump on my engine, and it made me think about the alternator--I am preparing for a long trip that cannot be sailed effectively (the "Baja Bash"). If the alternator goes, so goes the engine. I coul...	MitchWest	1	577	Apr 13, 2015 by Stanley
	Waterlift muffler sizing with the Beta 16 for my Columbia 8.7 (Preview) Hello! I'm proceeding with the re-power for my Columbia 8.7 and wonder about waterlift muffler sizing. Centek lists several 2" models of different volumes. Any recommendations? Thanks! --Paul Mileski	Paul Mileski	3	1418	Apr 13, 2015 by Stanley
«First < 1 … 67 68 69 70 71 … 148 > Last» \| Page of 148 sorted by