new Beta 25 last spring. Panel buzzed until ran ground from panel to battery. This spring new depth gauge and speed gauge, both wired to independent terminal on fuse panel. When turned on, panel buzzes faintly. When engine running and gauges on, panel buzzes faintly. engine running with key turned to off, gauges do not work. Yard installed engine. Did they cross up something in wiring?
It sounds like the panel was not grounding through the harness. There is a good chance that the ground wire was damaged at the lower alternator bolt which is used as a ground point.
Do not run the engine with the key turned to off. Switching the key on and off with the engine running will damage the alternator diodes.
Was the cable removed from between alternator and starter motor?
__________________
Best regards,
Farron
Technical Sales and Service for Beta Marine, US Ltd. Minnesott Beach, NC PH: 252-249-2473 farron@betamarineusa.com