|
Repowering a CS33
(Preview)
I'm presently thinking of installing a Beta 25 in my boat. This is for a CS33, Displacement weight is 10,000 lbs, LWL is 27 feet. The engine I'm replacing is a Bukh DV20. The ppropeller that is presently on the boat is a three blade 15" X 12" RH. Maximum speed is about 6 knots. I would like to h...
|
R Auger
|
1
|
2422
|
|
|
|
|
Fitting an external regulator
(Preview)
We often get asked how to fit an external regulator to our engines. There are many differant makes and types. Some , like the Adverc controller just need a sense wire from the alternator, others like the Balmar need the internal regulator removed and replacing by a brush box. Here is a well put together...
|
Stanley
|
0
|
1353
|
|
|
|
|
Overheating
(Preview)
I have the BD 1005 28 hp. The engine has been running hot, but not overheating, so I had a mechanic clean the heat exchanger out. When I ran the boat this weekend under normal conditions it overheated. I still have good raw water flow and the impeller is in good condition. Could an air lock in the clo...
|
garrick martin
|
7
|
8202
|
|
|
|
|
Repowering my Albin Alpha 29
(Preview)
Hello, I have installed a new Beta 14, 2.6:1 gearbox (WOC K 25794) this winter. The boat was originally powered by a Yanmar 1GM10 and I have been running a 15x10.5, two blade folder (propeller blade tip clearance about 1.6 inch).Particulars for the boat are: LOA = 29.36', LWL = 23.62', Beam = 9.32' , D...
|
Anders
|
2
|
3029
|
|
|
|
|
Got a new Beta 60
(Preview)
Hi there. Looks like I'm getting in on the ground floor. I've just taken possession of a Beta 60, and although I don't expect problems when I finally install it later this summer, I will enjoy reading the various tips and techniques I find here. Here's a picture: For more details, please see my blog at...
|
Alchemy
|
0
|
1328
|
|
|
